Shop
APC Home/Office SurgeArrest 5 outlets 230V Extension PM5-UK
KSh2,900.00APC Home/Office SurgeArrest 5 outlets 230V Extension PM5-UK
- Output Connections: 5x British BS1363
- Input Connection: British BS1363 Plug
- Nominal Input Voltage: 230V
- Input Frequency: 50/60 Hz
- Maximum Input Current: 10A
- Surge Energy Rating: 918 Joules
- Peak Current Normal Mode: 13 kA
- Peak Current Common Mode: 13 kA
- Let Through Voltage Rating: < 900V
- EMI/RFI Noise rejection (100 kHz to 10 MHz): 20 dB
- Dimensions (H x W x D): 320 x 55 x 40 mm
- Weight: 0.51 kg
APC Notebook Surge Protector for AC, phone and network lines, 3 pin connection, 100-240V, EMEA
APC Notebook Surge Protector for AC, phone and network lines, 3 pin connection, 100-240V, EMEA
SurgeArrest Essential Features & Benefits
Safety
Protection Working Indicator
SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Fail Safe Mode
Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC’s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
Catastrophic Event Protection
SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
Marketing Features
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Protection
Lightning and Surge Protection
To prevent damage to your equipment from electric power surges and spikes.
IEEE let-through ratings and regulatory agency compliance
APC surge protectors undergo stringent testing by IEEE, and are awarded “let-through ratings”, which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.
Noise Filtering
Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
APC Smart UPS Online UPS 1000Va 1kva, 750VA, 1500va 1.5kva, 2000va 2kva, 3000va 3kva, 5000va 5kva, 10000va 10kva
KSh45,000.00 – KSh120,000.00APC Smart UPS Online UPS 1000Va 1kva, 750VA, 1500va 1.5kva, 2000va 2kva, 3000va 3kva, 5000va 5kva, 10000va 10kva
SMC1000IC KES 45,000.00
SMC1000I-2UC KES 55,000.00
SMT750IC KES 38,000.00
SMT1000IC KES 58,000.00
SMC1500I KES 60,000.00
SMC1500IC KES 63,000.00
SMC1500I-2UC KES 68,000.00
SMC2000I-2U KES 120,000.00
SMC2000I KES 84,000.00
SMT3000IC KES 170,000.00
SMT2200IC KES 110,000.00
Select options
This product has multiple variants. The options may be chosen on the product page
APC Smart UPS SRTG 6000VA 230V 6Kva Rackmount (SRTG6KXLI)
KSh540,000.00APC Smart-UPS RT 6kVA 230-SRTG6KXLI
- Chassis type: Tower / rack convertible
- Rack units: 4 U
- Effective power (W): 6000 W
- Apparent power (VA): 6000 VA
- Technology: Double conversion (online)
- Input/ Output Voltage: 230V
- Output Connections: 1 x Hard Wire 3-wire (H N + G), 4 x IEC 320 C19, 4 x IEC 320 C13
APC Smart-UPS 1000VA (SMT1000IC)
KSh70,000.00APC Smart-UPS 1000VA (SMT1000IC)
APC Smart-UPS 1000VA LCD 230V Interface Port(s) SMT1000IC
- Output Power Capacity: 700 Watts / 1.0 kVA
- Output Connections: 8x IEC 320 C13 (Battery Backup), 2x IEC Jumpers (Battery Backup)
- Nominal Output Voltage: 230V
- Nominal Input Voltage: 230V
- Input Connections: IEC 320 C14
- SmartConnect Port: Provides remote monitoring with automatic notifications, firmware updates, and advanced support services.
- LCD Interface: Intuitive interface with clear, accurate information and easy-to-use navigation keys for local configuration.
APC Smart-UPS 1000VA LCD 230V
KSh65,000.00APC Smart UPS 1000VA LCD 230V
- The APC Smart-UPS SMC Series offers guaranteed battery backup and surge protection for entry-level servers, small switches, networking devices, and point-of-sale (POS) equipment
- max. Output 1.000 VA / 600 Watts – Tower model
- Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
- Content of delivery: Smart UPS SMC User manual USB Cable Shutdown Software
APC Smart-UPS 1000VA LCD 230V Interface Port(s) SMT1000IC
KSh70,000.00APC Smart-UPS 1000VA LCD 230V Interface Port(s) SMT1000IC
- Powerful Backup Performance
- Output Capacity: Delivers up to 700 Watts / 1.0 kVA, providing ample backup power for multiple devices including computers, servers, networking equipment, and more.
- Seamless Transition: Instantly switches to battery power within 6ms, ensuring no disruption to your operations during power outages.
- Advanced Voltage Regulation (AVR)
- Stable Power Supply: Automatically adjusts voltage to maintain a consistent 230V output, protecting your equipment from voltage sags, surges, and spikes.
- Configurable Output Voltage: Easily adjust the nominal output voltage between 220V, 230V, and 240V to match your specific power requirements.
APC Smart-UPS 1000VA Rack Mount, LCD 230V -SMC1000I-2UC
KSh75,000.00APC Smart-UPS 1000VA Rack Mount, LCD 230V -SMC1000I-2UC
- Max Configurable Power (Watts): 600 Watts / 1.0kVA
- Output Voltage Distortion: Less than 5 %
- Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
- Other Output Voltages: 220 V, 240 V
- Topology: Line interactive
- Waveform type: Sine wave
- Transfer Time: 6 ms typical : 10 ms maximum
- Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing
- Input voltage range for main operations: 170 – 300 Adjustable, 180 – 287V
- Number of Power Cords: 1
- Other Input Voltages: 220 V, 240 V
APC Smart-UPS 1000VA, Rack Mount, LCD 230V -SMC1000I-2UC
KSh75,000.00APC Smart-UPS 1000VA, Rack Mount, LCD 230V -SMC1000I-2UC
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
High online efficiencyReduces utlility costs, generates less heat.
-
LCD Status DisplayProvides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
-
Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
-
Temperature-compensated battery charging
APC Smart-UPS 1500VA LCD 230V (SMT1500IC)
KSh100,000.00APC Smart-UPS 1500VA LCD 230V (SMT1500IC)
- APC Smart-UPS C 1500VA LCD 230V with SmartConnect for remote monitoring
- Max Configurable Power: 900Watts / 1.5kVA
- Input voltage range for main operations 180 – 287V
- Expected Battery Life (years) 3 – 5
- Control panel: Multi-function LCD status and control console
- Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Typical recharge time: 3hour(s)
- Surge Protection and Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
APC Smart-UPS 1500VA LCD 230V (SMT1500IC)
KSh105,000.00APC Smart-UPS 1500VA LCD 230V (SMT1500IC)
- APC Smart-UPS C 1500VA LCD 230V with SmartConnect for remote monitoring
- Max Configurable Power: 900Watts / 1.5kVA
- Input voltage range for main operations 180 – 287V
- Expected Battery Life (years) 3 – 5
- Control panel: Multi-function LCD status and control console
- Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Typical recharge time: 3hour(s)
- Surge Protection and Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
APC Smart-UPS 1500VA LCD 230V with SmartConnect (SMT1500IC)
KSh108,000.00APC Smart-UPS 1500VA LCD 230V (SMT1500IC)
- APC Smart-UPS C 1500VA LCD 230V with SmartConnect for remote monitoring
- Max Configurable Power: 900Watts / 1.5kVA
- Input voltage range for main operations 180 – 287V
- Expected Battery Life (years) 3 – 5
- Control panel: Multi-function LCD status and control console
- Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Typical recharge time: 3hour(s)
- Surge Protection and Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449
APC Smart-UPS 2200VA 2.2KVA LCD 230V SMT2200I
KSh210,000.00APC Smart-UPS 2200VA 2.2KVA LCD 230V SMT2200I
Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
Output Voltage Distortion: Less than 5 % at full load
Topology: Line interactive
Waveform type: Sine wave
Transfer Time; 6 ms typical : 10 ms maximum
APC Smart-UPS 3000VA LCD 230V with SmartConnect (SMT3000IC)
KSh230,000.00APC Smart-UPS 3000VA LCD 230V with SmartConnect (SMT3000IC)
Output power capacity : 2.7kWatts / 3.0kVA
Max Configurable Power (Watts) : 2.7kWatts / 3.0kVA
Nominal Output Voltage : 230V
Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion : Less than 5%
Output Frequency (sync to mains) : 50/60Hz +/- 3 Hz
Other Output Voltages : 220, 240
Topology : Line Interactive
Waveform type : Sine wave
Output Connections : (1) IEC 320 C19 (Battery Backup), (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup)
Transfer Time : 6ms typical : 10ms maximum
APC Smart-UPS 3000VA, 230V, LCD, rackmount, 2U (SMT3000RMI2UNC)
KSh278,650.00APC Smart-UPS 3000VA, 230V, LCD, rackmount, 2U (SMT3000RMI2UNC)
- Product Type: Line-interactive UPS
- Limited Warranty: 3 Year
- Output Voltage: 230 V AC
- Form Factor: Rack-mountable
- Load Capacity: 3000 VA/2700 W
APC Smart-UPS 5000VA 230V (SRTG5KXLI) Rackmount
KSh430,000.00- Power Capacity: Max Configurable Power of 5.0kWatts / 5.0kVA.
- Input Frequency: 40 – 70 Hz Auto-sensing.
- Output Frequency: 50/60 Hz +/- 3 Hz Sync to mains.
- Load Crest Factor: 3 : 1.
- Bypass: Both automatic and manual internal bypasses.
- Battery Modules: 2 included.
APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
KSh393,700.00APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
Key Features
- 5U Rackmount
- 5000VA
- 4000W
- 10x Outlets
- Serial Communication
APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
KSh500,000.00APC Smart-UPS 5000VA 230V Rackmount/Tower SUA5000RMI5U
APC 5000VA 230V Rackmount/Tower Smart-UPS, SUA5000RMI5U
- Model: APC 5000VA 230V Rackmount/Tower Smart-UPS (SUA5000RMI5U)
- Capacity: 5000VA / 3750W
- Input Voltage: 230V
- Rack Mount Size: 5U (Rackmount) / Tower Convertible
- Topology: Line Interactive
- Output Voltage: 230V
- Output Connections: 6x IEC 320 C13, 2x IEC 320 C19
Online store of household appliances and electronics
Then the question arises: where’s the content? Not there yet? That’s not so bad, there’s dummy copy to the rescue. But worse, what if the fish doesn’t fit in the can, the foot’s to big for the boot? Or to small? To short sentences, to many headings, images too large for the proposed design, or too small, or they fit in but it looks iffy for reasons.
A client that’s unhappy for a reason is a problem, a client that’s unhappy though he or her can’t quite put a finger on it is worse. Chances are there wasn’t collaboration, communication, and checkpoints, there wasn’t a process agreed upon or specified with the granularity required. It’s content strategy gone awry right from the start. If that’s what you think how bout the other way around? How can you evaluate content without design? No typography, no colors, no layout, no styles, all those things that convey the important signals that go beyond the mere textual, hierarchies of information, weight, emphasis, oblique stresses, priorities, all those subtle cues that also have visual and emotional appeal to the reader.